Cedar Skirt


To activate your new Solar Post Cap light: 

Remove the metal top by pressing inward on the side of the clear lens with holes, grasping the edge of the metal top and lifting it off.

Remove the plastic tab in the battery compartment to allow for terminal connection.

Replace the metal top by snapping it back onto the clear lens. (Be sure that the holes in the lens line up with the stubs on the metal top.)

Place your solar post cap light in direct sunlight for 24-48 hours with the switch in the OFF position to fully charge.

Once your solar post cap is fully charged, turn the switch to the ON position.

Your solar post cap light is now ready to be installed on your post. To attach to the post, apply an exterior-grade construction adhesive to the inside edge of the moulding at the bottom of the light and place it firmly onto the post.

Once the batteries are fully charged, you can leave the switch in the ON position. The solar collector will charge the batteries during the daylight hours and power the light during darkness. Your solar post cap light will stay lit for an average of 6 to 8 hours during the night and turn off during the day, allowing the solar collector to re-charge the batteries.

If your solar post cap light becomes dim or does not light, simply turn the switch to the OFF position for 48 hours and allow the solar collector to fully recharge the batteries.